Prevent Injuries to Workers from Moving Machinery Parts

Hand and arm injuries caused by machinery parts are far too common, even in this day and age. Take the time today to check all of your machines for hazards, and ensure that any moving parts are properly guarded.

  1. Do a risk assessment to identify the hazards presented by each of the machines on site. See where a worker could get their hand pulled in by a rotating blade or roller, where a sharp blade could cut them, or where a machinery part could crush them, for example.
  2. Prevent access to these parts where possible, for example by enclosing the machine. Paint lines around machines to show workers the safe areas in which they should stand. Provide emergency stop buttons in suitable places and ensure they are visible and working correctly. Use interlocks where feasible on machine doors to stop the process should the doors be opened during the machine cycle.
  3. Use suitable guarding on areas that are hard to fully enclose. Use fixed, durable guards that cannot be easily removed.
  4. Train workers on the hazards identified and on how to use control measures such as guarding. Make sure they know not to remove any guarding without permission, and that the machine must be isolated from the power source first.
  5. Prepare in advance for maintenance and cleaning activities. Plan how workers should undertake these roles, and how guarding or other controls are to be safely removed. Use a checklist to verify that all controls are back in place and working correctly before the machine is put back into use.

Contact us if you require assistance.

Print
Contact Us